HOW TO FIX CANON PRINTER ERROR 5B00

Canon printers are well known for their quality print at an economic price. They use the most advanced technologies to deliver high-quality print. But like every other device, they can develop issues due to prolonged use. One such common error is the error code 5b00. If you are also facing this issue, then this blog will provide the answer to how to fix Canon printer error 5b00.

This error is a common error that Canon users face globally. This error mainly arises due to cartridges but there are other reasons for it as well. No matter the cause of this error, we present the Canon printer error solution that shall help fix this problem. Without much ado, let’s jump to the solution to this problem.

Reset the ink counter

To resolve this error, try the following steps.

Step 1: Disconnect the device from your computer as well as the wall power source.

Step 2: Press and hold the power icon of the printer while disconnecting the power cable from the computer as well as the socket.

Step 3: Hold the power button this the resetting is taking place. Once all sounds are stopped, let go of the power button.

Step 4: Halt till the green power light in the printer switches off. Thereafter, tap and let go of the power icon twice. The green light shall flash for 2-3 seconds and then it gets stable.

This shall successfully reset the ink counter. If the above canon printer errors help wasn’t beneficial, move on to the next step.

Method 2: Manually cleaning the waste ink foam

Step 1: Take out the lid of the printer to see the cartridges inside. Right at their rear end, you can spot a row of white rollers.

Step 2: Clean the foam pad.

You will locate a square structure resembling a foam pad behind the roller. Take a chunk of a soft surface like a paper towel and tap on the foam so that it discharges the ink. Keep doing so until all the ink is removed.

Step 3: Reassemble the printer.

Once done, place all the cartridges back in their slots and shut the printer lid. Once that is accomplished, you need to restart the printer. For this turn off the printer and then turn it on.

Leave a comment

Your email address will not be published. Required fields are marked *